Advantage
0-100 Digital Adjustable KV
Fully Adjustable Amperage
PGC1 Control Unit with PG1 powder coating gun
Fully Adjustable Air for Pump on Pressure, Dosage and Nozzle Rinsing Air.
Comes with Full Array of Nozzle Assortment.
Field Tested and Proven to operate in the toughest environments.
Comes with different array of delivery systems:
Hopper Feed - 45L
this system is specially balanced for the maximum spray capability with
the Smoothest Finish Possible.
FUNCTIONS
.The fluidzed powder in the powder hopper is sucked up in the injector by the conveying air. Through the powder hose the powder air mixture reached the gun
.The powder is electrostatically charged immediately it reaches the gun nozzle.An intense field also exists between the gun nozzle and the grounded workpiece. The electrostatically charged powder sprayed onto the workpiece adheres to the latters surface.
.This line voltage is converted in the control module to high –frequence current
this currents stpped up by the high-voltage transformer and the HV-cascade in the gun to 100KV and applier to the electrodes.
.The converying air and the dosing air is to be requlated on the control module , the fluidizing air on the peneumatic unit.
.The powder is fluidized by forcing air from bleow truough a proous plastic plate.
.The fluidized powder gets liguld –like properties..
→Technical Data
Power range 220v
Frequency 50/60HZ
Temperature range in use -10 ℃+40 ℃
Powder Gun
Gun weight: ……………… 500G
Rated output voltage(to gun) ……… 10V
Maximum output current ……… 100uA (max)
Maximum output voltage………… 0-100KV ( adjustable)
Maximum powder injection :……… 600g/min
Polarity ……………… negative or positive (optional)
Pneumatic technical spec
Maximum input-air pressure ………….. 10kg/cm3
Optimum input-air pressure…….. 6kg/cm3
Minimum input-air pressure …… 5kg/cm3
Maximum water vapor content or compressed air ….. 1.3g/N m3
Maximum oil vapor content of compressed air …….. 0.1mg/kg
Maximum cimpressed-air consumption……… 13.2 m3/h
.jpg)
.jpg)
