Technical Data
Power range 220v
Frequency 50/60HZ
Temperature range in use -10 ℃+40 ℃
Powder Gun
Gun weight: ……………… 500G
Rated output voltage(to gun) ……… 10V
Maximum output current ……… 100uA (max)
Maximum output voltage………… 0-100KV ( adjustable)
Maximum powder injection :……… 600g/min
Polarity ……………… negative or positive (optional)
Pneumatic technical spec
Maximum input-air pressure ………….. 10kg/cm3
Optimum input-air pressure…….. 6kg/cm3
Minimum input-air pressure …… 5kg/cm3
Maximum water vapor content or compressed air ….. 1.3g/N m3
Maximum oil vapor content of compressed air …….. 0.1mg/kg
Maximum cimpressed-air consumption……… 13.2 m3/h
Manual coating equipment Function description
the powder gun through the powder hose . The powder is electrostatically
charged at the nozzle of the gun. In addition, an electrostatic field is
created between the gun nozzle and the grounded object. The charged
powder spray remains adhered to the surface of the object.
The powder is fluidized by air forced through a porous plastic plate from
below. The powder acquires, thereby, fluid-like characteristics.
The conveying air, supplementary air, and rinsing air are set on the control
Unit
| Electrical data | |
| Mains input voltage | 100-240 VAC |
| Operating frequency | 50-60 Hz |
| Input power | 50W |
| Nominal output voltage (to the gun) | max. 12 V |
| Nominal output current (to the gun) | max. 1 A |
| | IP54 |
| Ambient temperature range | 0°C - +40°C (+32°F - +104°F) |
| Max. operating temperature | 85°C (+185°F) |
| Approvals | CE |
| | |
| Pneumatical data | |
| Compressed air connection | 1/4" male quick release |
| Max. input pressure | 10 bar / 145 psi |
| Min. input pressure (while unit in operation) | 6 bar / 87 psi |
| Max. water vapor content of the compressed | air 1.3 g/m³ |
| Max. oil vapor content of the compressed air | 0.1 mg/m³ |
| | |
| Packing Dimensions | |
| Length | 120CM |
| Width | 79CM |
| Height | 73CM |
| Weight | approx. 55kgs |
| | |
| Connection Description | |
| 1.1 Air In | Compressed air connection (6-10 bar / 87-145 PSI) |
| 2.1 Power | Mains cable connection (100-240 VAC) |
| 2.2 Gun | Gun cable connection |
| 1.4 | | Electrode rinsing air connection |
|
| 1.3 | Pict| Supplementary air connection |
|
| 1.2 | Pict |
| Grounding connection | Pict |
Include
A control unit power supply cable
- A air filter
- A air pressure regulator
- A fluidized powder hopper
- A plug-in injector
- An manual powder gun with gun cable, powder
hose, rinsing air hose and standard nozzle set.
- Pneumatic hoses for conveying air (red), supplementary
air (black) and fluidizing air (black)
powder hose
Ground wire
.jpg)
.jpg)
