pistola para el hogar y pequeñas aplicaciones
portable spray paint machine
Technical data
| Electrical data | |
| Mains input voltage | 100-240 VAC |
| Operating frequency | 50-60 Hz |
| Input power | 50W |
| Nominal output voltage (to the gun) | max. 12 V |
| Nominal output current (to the gun) | max. 1 A |
| | IP54 |
| Ambient temperature range | 0°C - +40°C (+32°F - +104°F) |
| Max. operating temperature | 85°C (+185°F) |
| Approvals | CE |
| | |
| Pneumatical data | |
| Compressed air connection | 1/4" male quick release |
| Max. input pressure | 10 bar / 145 psi |
| Min. input pressure (while unit in operation) | 6 bar / 87 psi |
| Max. water vapor content of the compressed | air 1.3 g/m³ |
| Max. oil vapor content of the compressed air | 0.1 mg/m³ |
| | |
| Packing Dimensions | |
| Length | 120CM |
| Width | 79CM |
| Height | 73CM |
| Weight | approx. 55kgs |
| | |
| Connection Description | |
| 1.1 Air In | Compressed air connection (6-10 bar / 87-145 PSI) |
| 2.1 Power | Mains cable connection (100-240 VAC) |
| 2.2 Gun | Gun cable connection |
| 1.4 | | Electrode rinsing air connection |
|
| 1.3 | Pict| Supplementary air connection |
|
| 1.2 | Pict |
| Grounding connection | Pict |
Designed for small sample testing or powdermanufacturers, the Cup Unitincorporates the application cup to the gun.The cup is self-fluidizingand is easy to clean, making color changesfast and easy.
660 Series Features and Specifications:
0-100 Digital Adjustable KV
Fully Adjustable Amperage
Control unit With three setting program,for flat shape workpiece,complicated shape workpiece,recoating,easy for operation.
Able to cut Pulse Power on and off
Fully Adjustable Air for Pump on Pressure, Dosage and Nozzle Rinsing Air.
Comes with Full Array of Nozzle Assortment.
Field Tested and Proven to operate in the toughest environments.
Comes with different array of delivery systems:
Canister Feed - CUP
it is specially balanced for the maximum spray capability with
the Smoothest Finish Possible.
Designedfor small sample testing or powdermanufacturers, the Cup Unitincorporates the application cup to the gun.The cup is self-fluidizingand is easy to clean, making color changesfast and easy.
Manual coating equipment Function description
the powder gun through the powder hose . The powder is electrostatically
charged at the nozzle of the gun. In addition, an electrostatic field is
created between the gun nozzle and the grounded object. The charged
powder spray remains adhered to the surface of the object.
The powder is fluidized by air forced through a porous plastic plate from
below. The powder acquires, thereby, fluid-like characteristics.
The conveying air, supplementary air, and rinsing air are set on the control
Unit
Include
A control unit power supply cable
- A air filter
- A fluidized powder hopper
- An manual cup powder gun with gun cable, powder
hose, rinsing air hose and standard nozzle set.
- Pneumatic hoses for conveying air (red), supplementary
air (black) and fluidizing air (black)
Ground wire
AIR BLOW GUN
Electrical data
Mains input voltage: 220V/110V
Operating frequency: 50Hz /60Hz
Powder: 50W
Output voltage (to the gun): 0-100KV ( adjustable)
Maximum output current (to the gun): 180UA(max)
Protection type: IP54
Approvals: CE Certification
Pneumatical data
Input pressure: Min. 6 bar(87PSI)/max. 10 bar(145PSI)
Recommended input pressure: 7 bar(101.5PSI)
Max. Water vapor content of the compressed
Air 1.3 G/m 3;
Max. Oil vapor content of the compressed air 0.1 mg/m3;
Packing Dimensions
Length: 44cm
Width: 44cm
Height: 56cm
Weight: 12 kgs.
Theprocess of the coating is like this :thepowder is fluidized in thepowder hopper. The injectors transport thepowder through the hoses tothe guns . The guns spray a powder/airmixture onto the workpieces.
Powdercoating is a type of coating that is applied as afree-flowing, drypowder. The main difference between a conventionalliquid paint and apowder coating is that the powder coating does notrequire a solventto keep the binder and filler parts in a liquidsuspension form. Thecoating is typically applied electrostatically andis then cured underheat to allow it to flow and form a "skin". Thepowder may be a thermoplastic or a thermoset polymer.It is usually usedto create a hard finish that is tougher thanconventional paint. Powdercoating is mainly used for coating of metals, such as "whiteware,"aluminium extrusions, and automobile and bicycle parts. Newertechnologies allow other materials, such as MDF (medium-densityfibreboard), to be powder coated using different methods.
- Part preparation or the pre-treatment
- The powder application
Curing
Please contact me to make further communication:
