CHECK FUNCTION OPERATION

1. Functions

1) cuts off the powder supply from pressure-decrease valve.

2) Lowers the control box high –voltage adjustment handle  down to bottom –lef position .

3) See what happens when the high-voltage adjustment handle is turned from to right to slowly increase the voltage level.

4) Approach the ground up to the distance of 20cm holding GUN and see the high-voltage display drop.

5) Pull the GUN′trigger.

The high-voltage indicator begins to operate

Check if the voltage level changes when the high-voltage adjustment handle is turned .

6) open MAIN AIR and suplly air

7) pull the GUN′ trigger and open the CONVEYING AIR

The pressure gauge hand moves

Pull the gun s trigger close the CONVEYING AIR and open the DOSING AIR

The gauge shand moves .

If all factors suggested above is all right , every is O K

Remove powder from the nozzle of gun by AUXILIARY AIR

Power supply and fluidizing air supply.

2. LOADING

open the lid

fill powder up to the hoper s handle level

colse the ld and assemble hose

If everything checks alrigh, the quipment is ready

Slightest abnormality requires preferring to the emergency –measure guide.

→TEST OPERATION

1. PAINTING

CAUTION: Check if all the conducting material within 5 meters around powder booth are completely grounded

1) Check if the powder is fluidified

2) Turn on the powder switch

3) Face the gun to direction of BOOTH

4) Pull the trigger

5) Adjust the high voltage to the  required level-the level can be monitored by a meter

6) Wait unitl the first-spayed  powder comes out completely dried.

7) Proceed with spraying object to be powder coated ..

2 Taking stop spraying measure

1) release the GUN S trigger

2) turn off the power switch

as the powder is still fluid , you shouldnot  adjust the amount of high voltage . Cleaning air and powder output.

3) Be sure to turn off the power switch and cut off air valve during lunch time or after sinishing work