Automatic Powder Coating Boothis one of the most critical components of the product finishing process
thisMulti-level cyclone separator plus double grades recycling, to recycle more powder and eliminate powder leakage. Powder Recovery:.
Benefits of our Powder Booths
1,Multi-Cyclone recovery system ensures extremely high levels of powder recovery 98% .
2,Faster Color Change:The Bottom of the Booth prevents accumulation of the powder and makes it very easy for cleaning and quick Color change.
3,Higher life of cartridge filter with unique Rotary wing cleaning mechanism
Technical Date:
| Outside size | 8000 x W 1700 x H 3000mm |
| multi-cyclone qty | 16pcs |
| Hand gun opening qty | 2pcs |
| Auto gun opening QTY | 8PCS |
| Exhaust | 15000 M3/Hr(150mm/Aq) |
| Fan type | Anti-explode Fan |
| Booth Carbin material | SUS304 |
| Fluorescent lamp | 40W |
| Cartridges filter | 12pcs |
| Booth the average wind speed | 0.5M/Sec.(150mm/Aq) |
| Voltage | 380V |
Drawing
fluidized bed powder coating equipment
Typical characteristics
manualbox unit is good for quick and easy color changes,It is designed to usethe powder manufacturer's original carton. An inclined vibration tableallows complete emptying of the powder box via the fluidized suctiontube.
0-100 Digital Adjustable KV
Fully Adjustable Amperage
Interchangeable with the Gema original equipment OPTIFLEX
Fully Adjustable Air for Pump on Pressure, Dosage and Nozzle Rinsing Air.
Comes with Full Array of Nozzle Assortment.
Field Tested and Proven to operate in the toughest environments.
Comes with different array of delivery systems:
Because this system is specially balanced for the maximum spray capability with
the Smoothest Finish Possible.
Configuration:
1pcs optistar control unit power supply cable
- 1pcs air filter
- A air pressure regulator
- 1pcs suction tube
- 1pcs plug-in injector
- 1pcs optiselect manual powder gun with gun cable, powder
hose, rinsing air hose and standard nozzle set.
- Pneumatic hoses for conveying air (red), supplementary
air (black) and fluidizing air (black)
powder hose
Ground wire
Technical data:
Electrical data
Mains input voltage: 220V/110V
Operating frequency: 50Hz /60Hz
Powder: 50W
Output voltage (to the gun): 0-100KV ( adjustable)
Maximum output current (to the gun): 180UA(max)
Protection type: IP54
Approvals: CE Certification
Pneumatical data
Input pressure: Min. 6 bar(87PSI)/max. 10 bar(145PSI)
Recommended input pressure: 7 bar(101.5PSI)
Max. Water vapor content of the compressed
Air 1.3 G/m 3;
Max. Oil vapor content of the compressed air 0.1 mg/m3;
Dimensions
Carton size: 120x79x73cm G. W: 55kg.
The spray booth is manufacture according to your requirements. All powder coating booths are formed on CNC equipment
Theprocess of the coating is like this :the powder is fluidized in thepowder hopper. The injectors transport the powder through the hoses tothe guns . The guns spray a powder/air mixture onto the workpieces.
Powdercoating is a type of coating that is applied as a free-flowing, drypowder. The main difference between a conventional liquid paint and apowder coating is that the powder coating does not require a solventto keep the binder and filler parts in a liquid suspension form. Thecoating is typically applied electrostatically and is then cured underheat to allow it to flow and form a "skin". The powder may be a thermoplastic or a thermoset polymer.It is usually used to create a hard finish that is tougher thanconventional paint. Powder coating is mainly used for coating of metals, such as "whiteware," aluminium extrusions, and automobile and bicycle parts. Newer technologies allow other materials, such as MDF (medium-density fibreboard), to be powder coated using different methods.
- Part preparation or the pre-treatment
- The powder application
- Curing
