The comprehensive design reliability, advanced, reasonable and economical considerations, its main structural features:
()Drying tunnel -1pcs (two ends out , the middle separated)
1Inner size:L8000×W2000×H1700mm,Furnace wall material:t1.0mm Hot-rolled plates, furnace wall materials: t1.0mm Valencia pressure plate, insulation layer thickness: 100mm thermal insulation rockwool special extended shaft thermal cycling fan power 2.2KW-2 units
2Return air system
1) The bottom feed, Using a cyclic manner at the bottom, balancing of hot air.
2) wind deflector wind guide, on the floor punching to ensure uniform temperature.
3) circulation fan power: 2.2KW 2 sets
3Heating system heating power: 60KW
Heating system with scattered fin electric heating tubes, circulating fan, automatic temperature control probe, electrically heated heat pipe in the heating chamber is energized by the circulating fan sent directly to the inside of the drying tunnel, by circulating fans constantly cycle, the oven The internal temperature rise to a set temperature distribution uniform.
Automatic control of temperature and digital display to adjust the temperature of the drying tunnel. Exhaust gas through the exhaust pipe exclude.
Insulation groups automatically turn off when the temperature reaches the upper limit. Temperature limit automatically open. The circulating fans qualities insulation, plus the long axis, the effective protection of the motor. Automatic control box electrical Delixi or Chint brand.
()Spray booth-1pcs
1.outer booth size:L3000×W1800×H2100mm(t1.5mm hot plate)1pcs,surface liquid painting.
Powder room with a plate assembly welded structure, the bottom is flat structure, convenient the workpiece cart into dusting operation, aesthetic appearance.
Flat structure within the powder room, powder room cleanup work more convenient, fast, and two open ear canal, used for the workpiece through.
2. Electronic the pulse recovery system --- 1set
The electronic pulse cleaning powder recovery system consists of the following components:
1) fiber resin filter Ø325 × 900 (washable) 4
2) pulse cleaning injection mouth 4
3) the gas tank of a circular steel
4) recycling fan model (4-72-4A-5.5KW) 1 units
Filter after a period of work, the surface of the powder was filtered piled thicker, pulse cleaning of the filter inside the apparatus at this time, the compressed air is released from the inside outward moment, so that the powder falling through vibrations. Pulse control with manual.
()Powder coating machine—1pcs colo-800
1. intelligent control unit ,digital display for voltage,current
2. Imported Italy parts, good for recoating,complex workpieces,100kv adjusted powder coating gun with stainless powder hopper.
2.included:
Control unit –1pcs
powder than ---1pcs (55l)
Trolley—1pcs
Powder pump-1pcs
Oil filter-1pcs
Fluiding unit-1pcs
Power cable—1pcs
Groundly cable-1pcs
Air tubes—3pcs
3.electric technical
Input voltage:AC220V/50Hz +/-10%
input power:≤50W
Working voltage:DC24V
Voltage of gun:0—100KV(ADJUST)
Max curring:100UA
