Our Powder Booths make efficient use of shop space and are designed for manual "batch" or automated/process powder coating with or without overspray reclamation. Shop air is drawn into the spray booth, and then passes through the booth's workspace into a filtered plenum integrated into the wall(s). The air is filtered in multiple stages and then discharged to the outside atmosphere or routed back into the room. Disposable filters are easy to inspect and replace. Optional reclaim systems are available. Intelligent design allows for installation with limited overhead clearance. First set of filters is provided with each booth.

All hardware, filters and sealants needed for installation are included. The control panel and other electrical components may be purchased separately. All spray booth products comply with OSHA and NFPA regulations. Booths up to 24' x 24' and over 100' long are available. Call for sizes or features that are not listed! FREE CRATING ON ALL POWDER SPRAY BOOTHS
FREE NEMA CONTROL PANEL WITH ALL POWDER SPRAY BOOTHS

Advantages for the COLO powder coating spray booth

1. Simple to Install

a. Bolted construction makes the booth structure easy to arrange and assemble.

b. All power and interlock connections are made to one location for fast, simple installation.

c. Optional preassembled booth structure can save installation time.

2. Easy to Use

a. As a building material, PolyVinyl Chloride is durable, and easy to assemble.

b. PolyVinyl Chloride is an extremely durable plastic material that resists abrasion and scratching.

c. The hard, slick surface of the COLO Booth stays smooth, clear and easy to clean.

d. The proven vertically mounted filters ensure easy access and reduced maintenance time over other designs.

e. Side-draft cartridge modules are interchangeable for simple and easy color changes.

f. The mobile cartridge collector assembly features an automatic locking device to ensure a tight fit. Minimal effort is required by the operator to change collectors.

g. When a fast color change is needed, two or more COLO Series booths can be installed in a roll on/off configuration.

h. Collector opening is at floor level for easy removal of powder from the booth floor and for transfer back to the reclaim assembly.

3. Efficient Design

a. Location of automatic gun slots, manual openings, the collector module and the aerodynamic design of the vestibules all contribute to maximize first pass powder transfer efficiency.

b. Clear PolyVinyl Chloride panels provide the best possible lighting for product application.

c. Complete visibility of spray operation is available at all times, allowing visual monitoring of both manual and automatic gun performance.

d. Filter performance is monitored to maintain peak operating efficiency.

e. Cabin structures are arranged to meet specific application needs with our unique combination of clear and stainless steel structure, or an optional all stainless configuration.

f. Compact floor space design of collection equipment saves on plant floor space.

g. All COLO Series booth bases are designed to integrate into most standard systems without conveyor elevation changes.

h. Each cabin structure incorporates air flow vestibules in each automatic gun slot, channeling the airflow around the gun and ensuring containment of oversprayed powder.

i. Side-draft collection provides uniform airflow while allowing the operator to visually inspect the level of powder in the bottom of the collector.

j. Unique to COLO equipments, direct drive fan provides uniform air volume performance over the full life of the cartridges.

k. Highly efficient fan system helps booth rank as quietest on the market.

l. Low pressure, high volume back-pulse reduces noise and improves cartridge life.

4. Outstanding Performance

a. Cartridge filter design maximizes both life and powder recovery performance of the filters, providing maximum filtration at the lowest possible pressure drop.

b. Uniform disbursement of recovery air recycled through highly efficient safety filters.

c. PolyVinyl Chloride material reduces the amount of powder build-up on booth walls, allowing more powder to be attracted to the part, thus minimizing clean up.

d. Aerodynamic side-draft design creates a superior application zone for repeatable performance.

e. Open-face collector promotes uniform air flow at lower velocity contributing to more consistent application performance.

f. Efficient design provides greater than 95% material utilization.