|
Hangzhou Color Powder coating Equipment co.,ltd
|
| Payment Terms: | T/T,T/T |
| Place of Origin: | Zhejiang, China (Mainland) |
|
|
| Add to My Favorites | |
| HiSupplier Escrow |
Tunnel Type Electrical , Gas Powder Coating Oven With Welded Or Modular Construction
Quick Detail:
1.Welded or modular construction with high quality M.S Sheet
2.Hot air circulating blower for uniform heat
3.High quality insulation (Glass/mineral wool) to eliminate heat loss
4.Electrical,gas& diesel fired (heat exchanger)
5.Digital temperature controller with auto on/off or manual 
below data just for certain project case
number | item | data |
1 | External size: | L25×W1.25×H4.92mm(the rail top elevation) |
2 | Internal size: | W1.15×H2.55m |
3 | mode ofdrying tunnel: | Full bridge mode |
4 | Thickness of the insulated board: | Side plate:120mm, roof/bottom plate:120mm |
5 | Inner and outer plate of insulation layer | Internal plate:δ1.omm galvanized board, outer plate:δ1.omm cold plate |
6 | Wind tube | δ 1.0mm galvanized board |
7 | Natural exhaust device: | 1piece |
8 | Effective drying length: | About 40m(except the length of climbing section) |
9 | Baking time: | About 20 min |
10 | Heating time (empty furnace) | about45min |
11 | Heating temperature: | 180220℃ adjustable |
12 | 380000cal burner | 1piece FS38 |
13 | 380000cal heating box | 1set(outer plate:δ1.0mm cold plate, internal plate:δ1.0mm galvanized board) |
14 | Heat induced draft fan | 4-72NO6A,1450r/min,4KW,2pieces |
15 | 380000cal heat exchanger | High temperature resistant stainless steel, quantity:1set |
tunnel type powder coating curing oven system:
Whether electrical, gas or diesel fired. Whether batch type or conveyorized tunnel type. Designed and built
specially for Powder & Liquid curing purposes assuring you of low power consumption with uniform
temperature throughout the working space in the oven.
Melting & Curing constitutes a highly critical phase of the powder coating process. The curing schedules
recommended by the powder or liquid supplier must be strictly followed, if good adhesion & corrosion
resistance is to be achieved. While powder melts at approx.100°C, curing requires higher temperatures
usually between 180°C to 200°C.If the curing is inadequate, the quality will be brittle and flake-off easily.
If the powder coat is exposed to harsh heat its colour may change.
Construction:
Welded or modular construction with high quality M.S Sheet
Hot air circulating blower for uniform heat
High quality insulation (Glass/mineral wool) to eliminate heat loss
Electrical,gas& diesel fired (heat exchanger)
Digital temperature controller with auto on/off or manual
Asbestos gasketing, flap sliding doors
Perfect locking arrangement and heat resistant paint(in side)
Hangzhou Color Powder coating Equipment co.,ltd [China (Mainland)]
Business Type:Manufacturer, Distributor/Wholesaler
City: Hangzhou
Province/State: Zhejiang
Country/Region: China (Mainland)
|
Sally:
|
|
Sally:
|
