2013 Automatic colo-2000D electrostatic powder gun from China manufacturer - Hangzhou Color Powder coating Equipment co.,ltd

2013 Automatic colo-2000D electrostatic powder gun

Price:	1.0~2500.0 USD
Payment Terms:	T/T,L/C,WU,
Place of Origin:	Zhejiang, China (Mainland)


	Add to My Favorites
HiSupplier Escrow	Share \|

Product Detail

Model No.: colo-2000D

Production Capacity: 200pieces per month

Delivery Date: 7-15days

size: 2m

weight: 300kgs

Nominal input voltage: 170-264VAC single phase

Power consumption: 2.5kw

Depth: 0.7M

Means of Transport: Ocean,Air,

Packing: wood box

Brand Name: colo

height: 2.9m

Maximum speed: 0.8m/s

frequency: 50/60hz

width: 0.7M

Tolerance: +10%/-10%

HICOLO reciprocators for Electrostatic Powder Coating Machine

Problem and solution

Problem	Reason	Solution
Connect the power supply, but the indicator does not light	PCB problem Indicator problem	Change or repair pcb Change indictor
Light NO1 flash	Connection of sensors Sensors damaged	Check connection Change new sensors
Light NO 2 flash	Sensor wiring short circuit Sensors damaged	Check connection Sensors damaged
Control unit is work ,and in on status, but no moving	Voltage problem Inverter problem Mechanical parts jammed (above 3 problem ,inverter will show error flash	Check mechanical Change invert
Unable to change setting numbers and NO2 light flash	Limilted by the model 0	Change in model 0 and resetting
Upper and down stoke change too big or out of control	Mechanical place changed	Re-adjust the senor place
During move there are strange sounds and sometime the gun move unstable	Too loose of chain	Tight it and change new chain

2013 Automatic colo-2000D Reciproator with electrostatic powder gun

Maintenance

1. The chains need be checked and adding machine oil on time .Need tight the chain if the chain is too long1,chain need changed each year ,the chain type is 10A. Please note ,when you change the chain please make sure the chain mechanical position is not change.

2. Clean the wheel and metal tube on time ,if there are too much dust ,please clean it use the knife .Make the working condition clean it the best way.

3. Check if the controller is sealed ,if the seal is broken and please change the new one .Clean all the accessories in the controller with air ,after cleaning and please close it on time .Or the dust will come into the controller.

4. Clean and check the base on time ,clean the motor with air.

5. If the mechanical situation is changed ,please readjust the stand point ,or the moving will out of control .The method is :push the key ↑ or ↓,let the spray gun move to the middle of the working stroke ,then adjust the sensor on the bottom of the base ,when the data on the "m" indicated 500 and then the setting is finished.