Electrostatic powder painting equipmnet
Model: COLO-500star
High quality based on the COLO-500

This quick connector powder coating machine COLO-500Star
All connectors using quick coupling models
Suitable for heavy duty work
Manual powder coating equipment
1. CE certificate
2, powder hopper
Manual powder coating equipment
Built-in high voltage electrostatic generator
1. Powder applicable:
All coating powder specially for metal powder
2. Configuration:
Host = 1 pc
Powder Spray Gun = 1 pc

Powder hopper = 1 pc
Trolley = 1 pc
Powder pump = 1 pc
Oil-water separator = 1 pc
Air pressure regulating valve = 1 pc

Technical data:

Electrical data
Mains input voltage: 220V/110V
Operating frequency: 50HZ /60HZ
Powder: 50W
Output voltage (to the gun): 0-100KV ( adjustable)
Maximum output current (to the gun): 180UA(max)
Protection type: IP54
Approvals: CE Certification

Pneumatical data
Input pressure: Min. 6 bar(87PSI)/max. 10 bar(145PSI)
Recommended input pressure: 7 bar(101.5PSI)
Max. Water vapor content of the compressed
Air 1.3 g/m³
Max. Oil vapor content of the compressed air 0.1 mg/m³

Dimensions
Carton size: 68x52x84cm G. W: 37kg
Powder coating gun, powder coating machine, powder coating system, powder coating equipment, powder coating control unit
Good brands of the valve, filter and so on
It is sold well in the Europe, US, South America, Asia ect.

0-100 Digital Adjustable KV
Fully Adjustable Amperage
Colo-500-Star Control Unit with colo-06 powder coating gun
Fully Adjustable Air for Pump on Pressure,

Dosage and Nozzle Rinsing Air
Comes with Full Array of Nozzle Assortment
Field Tested and Proven to operate in the toughest environments
Comes with different array of delivery systems:
Hope Feed - 45L

this system is specially balanced for the maximum spray capability with
the Smoothest Finish Possible.

Manual coating equipment Function description

the powder gun through the powder hose . The powder is electrostatically

charged at the nozzle of the gun. In addition, an electrostatic field is

created between the gun nozzle and the grounded object. The charged

powder spray remains adhered to the surface of the object.

The powder is fluidized by air forced through a porous plastic plate from

below. The powder acquires, thereby, fluid-like characteristics.

The conveying air, supplementary air, and rinsing air are set on the control Unit

Technical Data

Power range                                   220v110v

Frequency                                     50/60HZ

Temperature range in use                      -10 °C+50 °C

Powder Gun

Gun weight:    ^^^                    500G

Rated output voltage ^…                      24VDC

Input voltage     ^^…                       - 200kv

Maximum output current^…                   180Ua(max)

Maximum output voltage^^                   0-100KV (adjustable)   

Maximum powder injection :^…                    600g/min

Polarity ^^^                                negative (-)  

Pneumatic technical spec

Maximum input-air pressure ^^..                 8kg/cm

Optimum input-air pressure^..                        6kg/cm

Minimum input-air pressure   ^                      4kg/cm

Maximum water vapor content or compressed air …..      1.4g/N m3

Maximum oil vapor content of compressed air   ^..     0.1ppm

Maximum cimpressed-air consumption^…            13.2 m3/h

Including following parts

control unit with A trolly

control unit power supply cable

air filter

air pressure regulator

fluidized powder hopper (45L)

A plug-in injector

manual powder gun with gun cable,

Powder hose

rinsing air hose and standard nozzle set.

Pneumatic hoses for conveying air (red),

Supplementary air (black)

fluidizing air (black)

powder hose

Ground wire